With a USB extension 6 axis parallel MACH3 interface board CNC Controller

arcozhangLeave a comment
htb1xlvrlvxxxxa5xfxxq6xxfxxxs1, while controlling operation of the stepper motor 6
2, with 21 programmable input interface, can be configured to limit emergency stop and other functions.
3, with 10 programmable output interface, can be configured as a water-cooled, cold fog and other accused peripherals.
4, the spindle PWM output control.
5, support MACH3 software.
7, USB interface IO Expansion + parallel stepper motor control.
8, DCDC electrical isolation.
9, distribution manual.
10, the maximum 100K stepper motor control pulse output, suitable for most machine tool system needs.

GRBL Controller Board 3 Axis CNC Controller Offline Controller Laser Board

arcozhangLeave a comment
Double Y-Axis,  all-round use;htb1zaxuacnrk1rjsspkq6yuvxxap
Integrated 3 A4988 drivers, directly connect to four wire stepper motor;
Support Laser or Spindle;
Support 12V, 5V with TTL and without TTL laser;
Adjustable driver subdivision;
Support the xyz limit switch, probe interface;
Support external Offline Controller(Optional);
Nano 3Axis Control Board is a Arduino Nano based 3 Axises Motion control system, can be used  for Laser Engraving machine, Drawer Machine, CNC Engraving Machine etc.

DSP0501 CNC Controller CNC Wireless Handwheel 3 Axis Engracing Handwheel Kit English Edition DSP Handle

arcozhangLeave a comment

DSP0htb1dazaazzuk1rjsspeq6zihvxaz501 CNC Controller

Embedded systems.

USB storage devices read.

Multiple formats G code and PLT (HPGL) files read.

G code writing error checking.

Preflight processing code.

Parameter setting safety value protection.

Machine safety size restrictions.

Self-diagnostic system.

Hardware Resources:

TI DSP movement dedicated processor

Hardware core axis movement

USB host interface (external memory read)

USB (maintenance system) from the interface

8 inputs and outputs (expandable to 64 into 64)

D / A output (optional)

GRBL Offline Controller board for PRO 1610/2418/3018 Carving Milling Machine 3 Axis Offline CNC Controller Engraver

arcozhangLeave a comment

utb8rozcjsbixkjksaefq6yasxxatDesc.

press Z+ and Z-  , the Z axis will move up and down.
press X+ and X-  , the X axis will move left and right.
press Y+ and Y-  ,  the Y axis will move Front and Back.
press  SPIN : Spindle on (Laser on ), Spindle off (laser off)
press SMOD: return
SD card:Included , you need a SD card reader to write into the root directory G-code files .
press Z+ for 5 seconds , change the Language to English.

3 Axis CNC USB Card Mach3, usb motion card, 200KHz Breakout Board Interface

arcozhangLeave a comment
Contain:
1. 3 Axis Mach3 USB Motion control card
2. High quality USB cable with two magnet rings
3.Ratio-adjustment knob
4. Wiring instructions and Manual operation in English

free-shipping-3-axis-cnc-usb-card-mach3-usb-motion-card-200khz-breakout-board-interface-for

Features
  • No need to install any USB drivers,it can be used after plugging in the computer.

     

  • Full support for USB hot-swappable, the card is Monitoring USB connection status at any time.

     

  • Maximum step-pulse frequency is 200KHz,which is suitable for the servo or stepping motor.

     

  • Status indicator LED can be useful to show the USB connection, and working stauts by flashing.

     

  • 16 general-purpose input, with particular indicators, the input signal states can clearly shows.

     

  • With on-board isolated power supply, external power supply is not requested. Simplifying power requirements of electronic control system for easy using. in addition, external power can also be applied for reduce USB load.

     

  • Feed rate, spindle speed rate, or jog rate can by controlled by the adjustment-knob.

     

  • 10 high-speed optocouplers with 10MHz, 24 general optocouplers for isolating all of the input/output signals, this high-cost design can be provided high performance and stable system.

     

  • Fully supporting Mach3 software limitation and backlash functions.

     

  • With a real-time speed chart and spindle speed changes can be observed

     

  • Fully supporting all Mach3 versions, including the Mach3 R3.043.066 version

     

  • Supporting Windows series, including Windows2000/XP/Vista/Windows7.

4 axis 3.5 Inch LCD Screen CNC controller lathe mini milling machine servo USB stepper motor sewing machine laser G code Spindle

arcozhangLeave a comment

TC55H is an upgrading version of TC55. It can control 4 feeding

htb1cdk7ipxxxxayxxxxq6xxfxxxc

axis, 1 analog spindle. It is equipped with 16

input port and 8 output port, supporting importing files from USB stick.

Technical Specifications 

Minimum data unit 0.001 mm

Maximum data size ± 99999.999mm

Maximum Speed: 9000mm/min (pulse is 0.001mm)

Maximum pulse output frequency 150KHz

Axis 1-4 (X,Y, Z,C)

X,Y,Z,C axis can conduct linear interpolation, X,Y can do circular interpolation.

Electric Gear: numerator :1-99999 denominator: 1-99999

USB: Importing program and boot picture

Isolated I/O port

Maximum Program Line: 5000

Maximum Program: 100

RAM: 128M

External Manual Operation: motor clockwise and counter clockwise spinning, start, pause, alert and stop

G code and M code

One panel MPG

3.5 inch color LCD, pixel 320*240

Analog Spindle Output: one 0-10v analog spindle

Support both servo and stepper motor

Support metric system, round, division, degree, inch etc.

3 Axis CNC Controller 400KHz USB Stick G code Spindle Control MPG Tool Setting TC5530H

arcozhangLeave a comment

argedo-3-axis-cnc-controller-400khz-usb-stick-g-code-spindle-control-mpg-tool-setting-tc5530h TC55H is an upgrading version of TC55. It can control 4 feeding axis, 1 analog spindle. It is equipped with 16 input port and 8 output port, supporting importing G code files from USB stick.  Support saving the current coordinates after power off.

  • Minimum data unit 0.001 mm
  • Maximum data size ± 99999.999mm
  • Maximum Speed: 24m/min (pulse is 0.001mm)
  • Maximum pulse output frequency 400KHz
  • Axis: 3 Axis (X,Y, Z)
  • X,Y,Z,C axis can conduct linear interpolation, X,Y can do circular interpolation.
  • Electric Gear: numerator :1-99999 denominator: 1-99999
  • USB: Importing program and boot picture(You can load your own logo)
  • Isolated I/O port
  • Maximum Program Line:999
  • Maximum Program: 99
  • RAM: 128M
  • External Manual Operation: motor clockwise and counter clockwise spinning, start, pause, alert and stop
  • G code and M code
  • One panel MPG(Registered Patent)
  • 3.5 inch color LCD, pixel 320*240
  • Analog Spindle Output: one 0-10v analog spindle
  • Support both servo and stepper motor
  • Support metric system, round, division, degree, inch etc
  • Use a usb to connect the computer as power supply or 24VDC power

5-axis CNC Interface Adapter Breakout Board CNC Controller For Stepper Motor Driver Board

arcozhangLeave a comment

Fully support of -mach3 and other computer software support for parallel port control.

USB power supply and peripherals powered phase separation to protect computer security.

Peripheral wide voltage input,12-24V, and anti-reverse function.

All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.

Feature:

All the way to the relay output port, control spindle switch. Output port P17 mouth.

All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.

Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.

P1 as PWM outputs can be controlled with optocoupler input spindle governor.

Can be accessed by a common cathode or common anode input level to 5V drive.5-axis cnc interface adapter breakout board cnc controller for stepper motor driver board

Ethernet 2MHz Mach3 CNC 4 Axis Motion Control Card Resume from Breakpoint for Lathes Mills Routers Lasers Plasma Engraver

arcozhangLeave a comment

Features:

  • Fully supporting all Mach3 versions, support Windows 7, 8, 10 (32-bits);
  • Only support Ethernet interface, need to set IP address (Please read page 20 on the instruction);
  • Support save data when power off, support resume from breakpoint;
  • Support spindle speed feedback;
  • Supports spindle PWM speed control output;
  • Support 10 meters Ethernet interface cable;
  • No need to install the driver, plug and play;
  • Supports 4-axis linkage;
  • Maximum step-pulse frequency is 2000KHz, 16 general-purpose input,8 output;
  • Support differential signal output;
  • Velocity feedback function, Spindle speed display in real time all IO-port isolation, interference, stable performance;
  • Support controlling servo motor and step motor;

ethernet 2mhz mach3 cnc 4 axis motion control card resume from breakpoint for lathes mills routers lasers plasma engraver