Cutting plotter mainboard+connect cable+ interface board with COM port and USB port, vinyle cutter board

arcozhang

Cutting plotter Mainboard + connection board + connect cable, vinyle cutter mainboard
These parts can be fix with different brands cutting plotter, for example, JK, JT(Jintian),FY, LK, JYT, XY, HF, SH series brands.

 

Now all cutting plotters are serial port + USB Port.

If you bought one cutting plotter many years before, you have to change the 3 parts, because old version are serial port + parallel port, unitl now no these parts.

Cutting-plotter-mainboard-connect-cable-interface-board-with-COM-port-and-USB-port-vinyle-cutter-board

NC 3G motion control card PCIMC-3G Servo studio card CNC 3Axis

arcozhang

NC  3G Motion control card compare to the 3D motion control card :

NC-3G-motion-control-card-PCIMC-3G-Servo-studio-card-CNC-3Axis-Interface-Adapter-Breakout-board

The pulse frequency of NC 3G card is much higher, the quality of controling pulse is better, controling resolution is higher, it is effective to improve the processing precision, stability and smoothness, reduces noise of machine, and improve the life of the machine. it can not be done by the old section of the 3D control card, the output frequency of 3D control card is only 47KHz.

  • It can prevent interference effectively to NC Studio 3G control card, and the stabilityof system is better. The anti-jamming capability of the old 3D control card is not very strong .
  • The function will be tested strictly to each set of control cards , the testing process is strictly, the quality is good.
  • Standard 15-pin terminal block, easy to product and repair.
  • The function of 3G control card which the quality first and speed first will match the most suitable parameter. The processing quality is good, the finishing is high. It does not support for old version 3D control card.
  • It supports Beijing carved ENG4.X format for NC Studio 3G control card, it has a function to point tool changing , without doing file conversion. It is more convenient to the customers who have client carving machine, or is familiar with carving typesetting software . It does not support for old version 3D control card.

GRBL Offline Controller Board 3Axis Stepper Motor

arcozhang

Specification:

GRBL-Offline-Controller-Board-3Axis-Stepper-Motor-Double-Y-Axis-USB-Driver-Board-For-1610-2418

Please note the positive and negative poles, make the right connection.
Its not seller’s responsibility if the fault was from this.
–Double y-axis, all-round use,XYZ or XYY.
–Stepper drive setup subdivision.
–Integrated 3 A4988 drivers, directly connect to four wire stepper motor.
–Support Laser or Spindle.
–Support 12V, 5V with TTL and without TTL laser.
–Adjustable driver subdivision.
–Support the xyz limit switch, probe interface.
–Support external Offline Controller(Optional).
–A4988 can be replaced with 8825 driver.
Nano 3Axis Control Board is a Arduino Nano based 3 Axises Motion control system, can be used
for Laser Engraving machine, Drawer Machine, CNC Engraving Machine etc.

CNC Mini laser engraving machine Controller Board 3 Axis GRBL USB Port

arcozhang

New Design V3.3 version CNC Mini laser engraving machine Controller Board 3 Axis GRBL USB Port Laser engraver control for CNC3018 CNC2418 CNC1610 CNC3018PRO CNC1610PRO

CNC-Mini-laser-engraving-machine-Controller-Board-3-Axis-GRBL-USB-Port-Laser-engraver-control-V3

Specification:

Connection: USB (USB-CH340)
Control System: GRBL
Support Program:GRBLCONTROL,CANDLE(3 Axis),LASERGRBL(laser)
Stepper motor driver: DRV8825
Support stepper motor: 42 Stepper Motor(1.3A/0.3Nm/24V)
Spindle Motor Support:775ER(24V/10000rmp/PWM 0%-100%)
Input Power Voltage:DC24V (12V-24V)
Laser engraving: Support 2 Pins Laser or 3 Pins laser

100KHz MDK2 4 Axis USB Mach3 CNC Motion Controller Board

arcozhang
CNC Controller Board Advantages:
  • 4 axis controller for stepper and servo motors
  • USB connection
  • 100 kHz maximum step frequenc
  • 12 us minimum pulse width, 50% duty cycle at higher frequencies
  • 7 digital outputs on board
  • jogging keyboard support
  • 8 limit switches with shift feature
  • 5 inputs
  • MPG pendant support
  • spindle encoder and index signal support for spindle synchronization
  • control external devices with I2C and UART protocol
  • homing procedure
  • tool change procedure
  • tool length sensor support
  • sensor for capturing and measuring
  • digitizing probe support
  • transformation matrix
  • soft limits
  • slave axes
  • backlash compensation
  • API

CNC Controller Board Specifications:

Model Number：USB CNC 4 Axis MDK2
Motor Type: 4 axis cnc controller for stepper and servo motors
Motor type: Stepper Motor
Voltage: 24V
Power Supply: DC
100KHz-MDK2-4-Axis-USB-Mach3-CNC-Motion-Controller-Board-For-CNC-Router-Machine

5 Axis Mach3 CNC Controller Board

arcozhang

Specs:

 

Input Power

5V DC power supply or computer USB to get power from PC

Work axis stepper

Received the highest 5-axis independent driving

Drive

Pulse + direction + enable signal.

5-Axis-Mach3-CNC-Controller-Board-For-CNC-Machine-Stepper-Motor-With-USB-Interface

 

Features:

The latest upgraded salable 5 axis cnc breakout board is speacilly designed for the CNC single axis stepper driver controller, such asM542, M542H, MA560, MA860H, 2M542, 2M982, DM542(A), DM860(A) etc.

With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc.

This 5 axis cnc controller board is suitable for Microstep Driver 2 Phase, 3 Phase, 4 Phase Microstep Driver

 

  • Upgraded circuit, work more peacefully and steady than the previous version
  • Maximum support 5-axis stepper motor driver controllers
  • Two ways to get power, 5V DC power supply or USB port to get power from PC directly
  • Two-stage signal processing, smooth signal transmission, powerful anti-jamming
  • 5-input interface to define the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc.
  • Relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
  • 5-axis work LED display, visually display the working condition of the stepper driver controller Interfaces

ncstudio controller 3 axis nc studio system

arcozhang

Support version:     English version 5.4.49/5.5.55/5.5.60

Version and wiring diagram for free !!!——(send by Email)

 

Suitable system:  XP

Suitable computer :  support desktop computer with have PCI,not support Lap-top

ncstudio-controller-3-axis-nc-studio-system-for-cnc-router-5-4-49-5-5-55

 

Advantage:

15 pin breakout board

7mm diameter cable

8 year rich manufacture experience

steady quality and perfect production

 

Applications: 

widely used on various cnc routers, and cnc engraving and milling machine for cutting, engraving, molding processing, advertising products manufacturing, etc.