Mach3 USB CNC Stepper Motor Controller Card Smooth Motion

arcozhang

3-4-6-Axis-Mach3-USB-CNC-Stepper-Motor-Controller-Card-Smooth-Motion-USB-Breakout-Board

  • Support All Mach3 versions, including the latest version.
  • Support all versions, including Win8 WIN10
  • USB doesn’t require a driver, all versions plug and play, support hot plug.
  • USB bus user high-grade chip magnetic coupling isolation, really valuable isolation
  • Input and output, super reliability, absolutely the safety of computer USB. At the same time the super anti-interference ability.
  • Single chip, the system is more refined, and is more stable than the general multi-chip processing method
  • Dual-core super-high-speed CPU (single-core maximum frequency of 204 MHz), strong processing capacity. and ensures that the pulse output frequency of 1000KHz under the three- linkage is realized, the pulse output frequency of 750 KHz and the 6- linkage under the four- linkage are linked,
  • The pulse output frequency is up to 500 KHz, and can be connected to the servo/ step.
  • The motion control buffer size can be set, the fastest interpolation period can be guaranteed to be stable, and the computer can operate stably even when the running load of the computer is overweight.
  •  It has a 16-way isolation input port, the input interface is simpler, the dry and dry contact of the port can be both, the wiring is simpler, the dry contact method can only be externally connected with a physical switch to the ground wire, and all the 16-way input port have the signal indication, and the indicator light is on when the low level is low, and the debugging is simple and clear.
  •  Up to 24 output port (with 8-way, RS485 extension), 32-way input (with 16-way input, RS485 can be extended for 16-way).
  • The PWM speed-regulating output port (isolated) can set the PWM frequency and the duty ratio of 0-1000 is continuously adjustable
  • With the function of speed measurement, the actual speed of the main shaft is displayed in real time in the Mach3 interface, and the measurement is accurate and stable.
  • With the NVRAM space of 256 bytes, the coordinate value and the processing line number of the 6 axes can be saved, and the power-on does not need to be found.
  • The output of all the motion axes is a differential signal, which can be connected with a servo high-speed signal input port.
  • You can set the slave to support dual X, dual Y, and double Z. Soft limit bottom treatment, the system is more secure
  •  RS485 isolation bus, external input/ output or ground servo read position, grounding ruler, etc. (need to be customized and developed)
  • All input and output is isolated from the motion control core, and the pulse isolation uses high-speed 10M optical coupling isolation. Single double pulse mode is supported
  • The upgrade is convenient, and the firmware of the upgrade hardware layer of the product is only brushed with the USB, the speed is high, the firmware is open, the test can be tested for 1 hour, and the hardware layer firmware can be shut down for more than 1 hour.

6-axle Control for Mach3 CNC Engraving Machine Manual Controller USB Connector Interface Board Pulse Generator

arcozhang

6-axle-Control-for-Mach3-CNC-Engraving-Machine-Manual-Controller-USB-Connector-Interface-Board-Pulse-Generator

  • This CNC engraving machine controller is specially designed for Mach3 system.
  • Easy to use, no need to install any software or drive, connected by USB port and the cable can be stretched to about 3 meters.
  • The controller has all commonly used functions for Mach operation, and can move both axles simultaneously.
  • Integrated function keys including emergency stop, cycle start, spindle on/off and so on.
  • 12*12mm buttons ensure that your finger will not interfere with the adjacent buttons.