TC55H is an upgrading version of TC55. It can control 4 feeding axis, 1 analog spindle. It is equipped with 16 input port and 8 output port, supporting importing G code files from USB stick. Support saving the current coordinates after power off.
Minimum data unit 0.001 mm
Maximum data size ± 99999.999mm
Maximum Speed: 24m/min (pulse is 0.001mm)
Maximum pulse output frequency 400KHz
Axis: 3 Axis (X,Y, Z)
X,Y,Z,C axis can conduct linear interpolation, X,Y can do circular interpolation.
Electric Gear: numerator :1-99999 denominator: 1-99999
USB: Importing program and boot picture(You can load your own logo)
Isolated I/O port
Maximum Program Line:999
Maximum Program: 99
RAM: 128M
External Manual Operation: motor clockwise and counter clockwise spinning, start, pause, alert and stop
G code and M code
One panel MPG(Registered Patent)
3.5 inch color LCD, pixel 320*240
Analog Spindle Output: one 0-10v analog spindle
Support both servo and stepper motor
Support metric system, round, division, degree, inch etc
Use a usb to connect the computer as power supply or 24VDC power
Fully support of -mach3 and other computer software support for parallel port control.
USB power supply and peripherals powered phase separation to protect computer security.
Peripheral wide voltage input,12-24V, and anti-reverse function.
All of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
Feature:
All the way to the relay output port, control spindle switch. Output port P17 mouth.
All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
P1 as PWM outputs can be controlled with optocoupler input spindle governor.
Can be accessed by a common cathode or common anode input level to 5V drive.
TC55H is an upgrading version of TC55. It can control 4 feeding axis, 1 analog spindle. It is equipped with 16 input port and 8 output port, supporting importing G code files from USB stick. Support saving the current coordinates after power off.
cnc controller 