4 axis CNC controller USB CNC Control drilling milling engraving router stepper servo motor controller with hand wheel MPG

3/4/6 axis Mach3 control card USB for cnc router control system, english version good quality

Feature:

1.     Support all versions of MACH3

2.     Support Windows operating system, including Windows2000/XP/Vista/Windwos7

3.     16 input IO

4.     All IO port fully isolated, strong anti-interference, stable performance

5.     Maximum step-pulse frequency is 2000KHZ, can connect servo driver/stepper driver

6.     Support 6 Axis Max, contain Inching 6 Axis linkage. (Different model support different Axis )

7.     Support Spindle PWM Speed Output ; support Spindle Pulse + Direction Output ; support Spindle Speed Output from 0-10V Analog Voltage.

8.     USB Jack does not need to install the driver, plug and play under all versions of Windows.

9.     Fully support USB Hot-plug, USB connection status monitoring at any time. Under MACH3 working status, USB cable unplug and then plug in, also can connection normally.

10.  Status Indicator LED is used to indicate working status, can indicate USB connection, MACH3 connection, running on, and so on, various status is indicated clearly.

Typical Application: support various CNC Machine, such as Engraving Machine system, cutting machine system :

1. CNC Cutting machine, such as Laser, plasma, flame etc.,
2. CNC Engraving machine for Carpentry furniture, advertisement, stone material, etc
3. CNC Engraving Milling Machine
4. Automation Equipment, Automatic welding equipment

Electrical Characteristics:

	Parameter Description
Axis output control:   Pulse + Direction	Drive Current	Isolated open collector output;5V,20mA
	Drive	Pulse + direction output
	Output Frequency	2000 KHZ
	Axis	MK3:3-axis;MK4:4-axis; MK6:6-axis
	Isolation Voltage	3.5KV
Spindle Inverter output	Analog voltage output	0-10V
	PMW output	5V,1KHZ,Duty;0-100%
	Pulse + direction output	5V,15KHZ to 4KHZ
8 IO output	Drive Current	Isolation;50mA,25V
	Isolation Voltage	3.5KV
16 IO input	Input current	Isolated inputs,5mA;max voltage 25V
	Isolation voltage	3.5KV
	MACH3 Port Position	P1 port
USB interface	Complies with USB 2.0 standard

This breakout board is designed by our Studio; it is a CNC system based mach3. Its version is 5.0 now. You do not need to add other Hardware, and you can complete the signal conversion from the G-code to the movement of the stepper motor drive control. This card is compatible

1. Simultaneously control 5 stepper motors.

2. With 30 programmable input interfaces, can be configured to be “limit”, “E-stop” and other functions.

3. With 25 programmable output interfaces, can work with water-cooling or mist-cooling spindle and other devices.

4. PWM/VSO (0-10V) spindle control mode.

5. USB interface, support MACH3 software.

6. DCDC electrical isolation

7. with maximum 2000KHZ stepper motor pulse control output, suitable for most machine system.

8. Dimensions: 120*72*20mm

9. Weight: 180g

III.  Requirements of Computer

Basic Configuration:

1. CPU:1GHz
2. Memory: 512MB
3. 500MB Available disk space
4. USB 2.0

Recommended configuration:

1. CPU: 2GHz Dual Core;
2. Memory:2GB;
3. 1G Available disk space
4. USB 2.0

IV.  Product feature:

1. USB communication interface, and power supply for the board;
2. 10 IO inputs, opto-isolated, it can be configured to limit the emergency stop and other functions, all of them are 2edg port.
3. 14 IO input with no opto-isolated but with iOS-IC. This port is set to IDC 2.54mm port.
4. 14 IO output with no opto-isolated but with iso-IC. This port is set to IDC 2.54mm port.
5. 2IO output with opto-isolated for spindle.
6. Up to 6 axis stepper-motor control port. Each port has up to 2000 KHz plus output;
7. COTEX-M3 of NXP-LPC is main control chip;
8. New design Aluminum shell make the system more stable
9. This system is equipped with RS2332 manual control box. You can use manual control box with this port.
10. Spindle control port has PWM Mod (0%-100% duty cycle with 12Vpp) and voltage Mod (0-10V).
11. Spindle speed feed back port-INDEX.
12. There is a power autostability system. When USB port overvoltage or under voltage or within other EMI, this system can make power of system stable.
13. There are High speed interface chips, which make stepper driver signal more stable.
14. There is a USB protection chip, which can protect system within high voltage EMI.

V.  Electrical parameters

A. System input voltage 5V;

B. Operating voltage of input interface with no opto-isolated: 5V

C. Operating voltage of input interfaces with opto-isolated: 12V;

D. Operating voltage of output interface: 5V;

E. stepper motor control signal output voltage: 5V; Spindle Signal: 10V.

High level Ethernet mach3 control card features:
– Support motion controller,digital handwheel and standard handwheel.
– Digital control serial COMI communication partial open protocol,users can develop control device with NVEM.
– IO extension serial COM2 communication partial open protocol,user can extend I0 in his willing.
– The highest output frequency 1MHz per axis.
– The max control 6 pcs stepper motor.
– 16-channel programmable input interface,can equip limit operation scram function.
– 12-channel programmable output interface,can equip water-cooling mist cooling controlled peripheral.
– 1-channel handwheel MPG interface,can support standard handwheel,digital serial handwheel,digital handwheel.
– Main axis PWM output control.
– Support MACH3 software.
– Ethernet interface,support MACH3 software.
– DCDC electrical isolation
– Optocoupler isolation
– Aluminum alloy shell,powerful anti-jamming performance.

Ethernet MACH3 3-Axis CNC Controller Interface Board Card 1MHz Output with shielded aluminum shell.

Application:
– Processing various patterns of colorful mold
– Used in advertising
– With CNC controller,suitable for a variety of small and medium-sized automatic equipment, instruments

– Fully supporting all Mach3 versions,including the Mach3 R3.043.066 version.
– Supporting Windows series,including Windows2000/XP/Vista/Win7/Win8/Win10.
– No need to install any USB drivers,it can be used after plugging in the computer.
– USB bus is the use of magnetic coupling isolation,isolation of real value,different from the general control card optocoupler input and output,do high reliability,absolute guarantee the safety of the computer USB.At the same time to ensure that the strong anti-interference ability of EMC.
– The single chip,the system stability is more streamlined,multi chip processing generally incomparable
– Dual core ultra-high speed CPU(the maximum single core frequency 204MHz),operation processing ability has great redundancy,and ensure the realization of four axis linkage under 500KHz frequency of the pulse output,6 axis pulse output frequencies up to 300kHz,connected to the servo/step
– Motion control buffer size can be set and ensure the fast interpolation cycle can stable operation,computer running overload can also smooth operation and interpolation cycle adjustable,can adapt to a variety of different needs.
– Has 16 input port,input interface more simple,port of wet and dry contact can be,wiring is simple,dry contact method for as long as the external connected to a physical switch to the wire can be,all 16 input port are indication signal,for low power usually indicating lamp is bright,debugging simple and clear.
– With 8 output ports,a single output drive capability of 500mA,can be directly driven by DC relay.
– The PWM speed output port can be set,the frequency of PWM,pulse width 0~1000 continuously adjustable.
– With the function of the speed,the actual speed of the spindle in the Mach3 interface,real-time display,accurate and stable measurement.
– With 256 bytes of NVRAM space,can save the coordinates of the 6 axes,the next power without the need to find the mechanical origin.
– The circuit board is made by the engineer,the design level is clear at a glance

Easy operation 3 Axis lathe CNC Controller replace mach3 cnc controller adopts CPU with 32 bits 400MHz ARM high capacity industrial grade composing a control core, and achieves the μm level accuracy motion control. It is characterized by multiple functions, Cheap and old CNC Controller models, stable and easy operation; Good Choice for small instrumental lathe machine or economical type lathe,drilling machine.