Tag: mach3 cnc

With a USB extension 6 axis parallel MACH3 interface board CNC Controller

arcozhangLeave a comment
htb1xlvrlvxxxxa5xfxxq6xxfxxxs1, while controlling operation of the stepper motor 6
2, with 21 programmable input interface, can be configured to limit emergency stop and other functions.
3, with 10 programmable output interface, can be configured as a water-cooled, cold fog and other accused peripherals.
4, the spindle PWM output control.
5, support MACH3 software.
7, USB interface IO Expansion + parallel stepper motor control.
8, DCDC electrical isolation.
9, distribution manual.
10, the maximum 100K stepper motor control pulse output, suitable for most machine tool system needs.

LCD 3.5Inch 1 axis CNC controller

arcozhangLeave a comment

We focus on CNC controller and this kits can work in various industrial environment !

The TC55 New version panel-type motion controller (CNC system) uses high-performance 32bit CPU. The drive device adopts subdivision stepping motor or AC servo motor. It is equipped with LCD monitor and fully enclosed touch-type operating keyboard. The system has high reliability, high precision, low noise, it is easy to operate etc.

Different with CNC controllers of Fanuc and Siemens, this controller use revolutionary conversational programming, which is easy to learn and use.

Main Functions 

Automatically execute:Actual running, Dry running, Single-step execution, Terminate program, Start and Pause function

htb1hhyeipxxxxbaxfxxq6xxfxxxh

Manual operation:Manual high speed, Manual low speed, Jog operation, Back to program zero, Back to machine zero

Program management:absolute programming, Incremental programming, linear and circular interpolation, back to machine zero, sub-program call,register, delay, repeat, Output, PLC set, Pause

Parameter settings:Set various control parameters of processing and operation, get the best status of processing effect

Exterior Manual Operation: control motor clockwise and counter-clockwise spinning, Start, Pause, Alert and Emergency Stop.

USB Connection and upgrade

PLC Extension

I/O Extension

Isolated I/O port

Chinese/English panel display

Technical Specifications 

Minimum data unit 0.001 mm

Maximum data size ± 99999.999mm

Maximum Speed: 9000mm/min (pulse is 0.001mm)

Maximum pulse output frequency 150KHz

Electric Gear: numerator :1-99999 denominator: 1-99999

System main functions are automatic, manual, program editing, system parameters, self-check, settings, etc.

Size

Outside Size  172×94×48mm

Installing Size: 162×84mm,Front Panel: 4mm

 

GRBL 0.9 USB Port CNC Engraving Machine Control Board,

arcozhangLeave a comment

ICROATO GRBL 0.9 USB Port CNC Engraving Machine Control Board, 3 Axis Control,Laser Engraving Machine Board

htb12maakc8ybenksnb4q6yevfxa3

GRBL CNC One-piece control board, three-axis drive + spindle drive, can directly drive the three-axis system + spindle power control, eliminating the need for electrical connection, suitable for ordinary engraving machine and laser engraving machine, DIY essential!!!

Spindle drive chip: MOSFET, the highest 60V (recommendation within 48V, current :within 10A )

Support stepper motor:12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)

DDCSV2.1 Offline Controller USB CNC controller interface CNC Router Engraving Milling machine

arcozhangLeave a comment
  • The DDCSV2.1 is the 3/4 axis and 3/4 axes motion controller, this is the update controller of DDCSV1.1
  • The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.
  • The DDCSV2.1 numerical control system adopts the ARM+FPGA design framework.
  • The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation.
  • The panel layout structure of DDCSV2.1 is rational. The common off-line operation can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set.

new-arrival-ddcsv2-1-offline-controller-support-3-axis-4-axis-usb-cnc-controller-interface-cnc

  • 1:The input signal is modified to support the NPN switch;
  • 2: Support limit and the home share the input port;
  • 3: Use the more stable FLASH, to ensure that no program loss;
  • 4: Upgrade algorithm, support soft interpolation, modified V1.1 version of arc interpolation bug;
  • 5: Upgrade the power module, the system is more stable.

 

  • – x1, x10, x100 switch 
  • – X,Y,Z,Ath axis selector switch 
  • – LED indicator 
  • – With Emergency stop 
  • – High quality professional chassis 
  • – 6ft extendable high quality shielded cable cord 
  • – Magnetic base holder can place anywhere on the machine steel surface
  • – Required 5V+, 150mA, power for MPG 
  • – Phase output is A+/A-;B+/B- 

  • – TTL output, drive capability +-20mA

htb1lm6zcibpk1rjszfyq6x_qfxaw