Specification: 

CNC Motion Control Card:

– Model: 3axis

– USB interface, support Mach3 Software

– Max 200khz stepper motor pulse output, suitable for most CNC milling machine system

– Support extend encoder to adjust FRO,SRO,SJR parameters

manual pulse:

High gear standard manual pulse MPG01

Full function standard manual pulse with emergency stop, support common

function operation, specific functions are as follows

Adopt high quality manual pulse，with 12mm diameter knob cap，good feel

Standard interface, convenient and efficient

Computer hardware requirements: CPU —- clocked at 1.6G above; — 1G RAM or more;
Computer System Requirements: WINDOWS system supports only the operating system, xp, win7-32 bit, win7-64 bit;
It supports the standard G-code files, such as * .nc, * tap and other tool path files;. Carved, SW, UG, PW, and other software to generate tool paths are supported;
It supports 4-axis, single-axis output frequency of up to 25K. 4-axis simultaneous maximum output frequency of 100K Hz;
It supports DXF files generated by CAD software; PLT / HPGL;
Support line cutting (need their own research);
It supports 4-axis limit function;
Support for knife function;
Support homing function;
Support tool change (need their own research);
Support spindle speed, switch control, water, spray control;
It supports all the features of the custom keyboard shortcuts;
CNC system supports most commonly used functions: Mirror, translation, circulation, and other functions;

This USB motion control card has the below advantages: small volume, easy to use, has a strong anti-interference ability, No need to install any USB drivers,it can be used after plugging in the computer. ,suitable for all versions of Windows. Fully supporting all Mach3 versions.

1.Dual-Processors, ARM+FPGA, More processing power

2.Support all versions of Mach3.

3.Work under Windows 32-bit operating system (not including Mac OS)

4.Support spindle speed feedback function.

5.USB jack does not need to install the driver, plug and play under all versions of Windows.

6.Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach3 working state, USB cable unplugs and then plugs in, but also the normal connection.

7.Supports 4 axis / 6 axis linkage.

8.Maximum step-pulse frequency is 2000 KHz, can connect servo driver and stepper driver.

9.The indicator light indicates various working status, such as USB connection, Mach3 connection and so on.

10.16 input IO, 8 output IO, Supports extended I / O control.

11.Onboard isolated power supply, not need external power supply.

12.All IO port fully isolated, strong anti-interference, stable performance.

13.Support spindle speed PWM output; support spindle pulse and direction output; support spindle speed output from 0 to 10V analog voltage.

14.Support XHC series of wireless electronic Mach4 MPG

15.With an aluminum shell, effectively shielding interference, stable and reliable performance.

Specification- Wireless hand wheel:

Radio frequency: 433 MHz, ISM, theTx power is 10DB and the RX sensitivity is 98DB

USB receiver 4axis / 6axis (X, Y, Z, A,B,C axis) with LCD display real-time display

Support 128*64 dot matrix input

Support 100PPR electronic hand wheel function.

Support the 13 shortcut keys, the user is free to define the function

Wireless transmission distance of 40 meters

64 channel frequency hopping transmission, strong anti-interference, stable and reliable; the channel gap is 1 MHz

Low power design, 2 AA battery for 1 months

Industrial grade design, dust proof design, stable and reliable

Applied to a variety of CNC systems, suitable for the use of the industry are: engraving machine industry, engraving and milling machine industry, CNC lathe industry, laser cutting machine industry, flame cutting machine industry, plasma cutting machine industry, automation production control industry.

Description:

The EC300 is a high-performance external motion controller for Mach 3 software, with Ethernet interface, supporting standard MPG and Digital Dream MPG. The device can communicate with a connection to a control computer’s network. The network connection can be built with direct connection or via router/Switch devices.

Feature:

• Motion control 3-6 Axis(X, Y, Z, A, B, C) for option, Max frequency output 300 KHz/Axis;
• Ethernet Connection with Mach 3 Software;
• Main power supply 24VDC, Current should higher than 1A;
• IO Power is 24VDC power supply input, current should higher than 1A(The controller already supply the power for IO port, no need the external power supply for IO port anymore);
• 12 opto-isolated digital input ports, 10 opto-isolated digital output ports;
• 1 analog output port of 0-10V adjustable speed for spindle (can change to PWM output port);
• ARM motion control chip, Two Relay output;
• It is Compatible with Standard MPG and also Digital Dream MPG

3 Axis Offline Controller+Handwheel Kits MPG 500Khz G Code Replace Mach3 USB CNC Controller for CNC Router Engraving Drilling