– Support all versions of Mach3, including the latest version.
– Support all Windows versions, including Win8 WIN10
– USB does not need to be driven, all Windows versions plug and play and support hot plug.
– USB bus adopts high grade chip magnetic coupling isolation, truly valuable isolation, it is different with the general control card optocoupler isolating input and output, this board with super reliability, and absolutely guarantee the security of the computer USB. At the same time, the super strong EMC anti-interference ability is guaranteed.
– Single chip, the system is more streamlined, which is much better than the general multichip processing mode.
– The dual core ultra high speed CPU (single core maximum frequency 204MHz) has great redundancy in computing power. And ensure the realization of the pulse output frequency of 1000KHz under the 3 axis linkage, the pulse output frequency of 750KHz under the 4 axis linkage, the output frequency of the 6 axis linkage pulse is up to 500KHz, and the servo / step can be connected.
– The size of the motion control buffer can be set to ensure that the fastest interpolation cycle can also operate stably, and the computer can run smoothly when the load is too heavy.
– It has 16 isolation input ports, the input interface is more simple, the port and wet connection can be used, the connection is more simple. As long as the external contact method is connected with a physical switch to the ground line, all 16 input ports have signal instructions.
– It has a maximum of 24 output ports (8 on its own, RS485 expandable), 32 input ports (with 16 inputs, and RS485 16 channels).
– PWM speed regulation output port (isolation), PWM frequency can be set, duty cycle 0~1000 can be adjusted continuously.
– Owning speed measurement function, the spindle’s actual speed is displayed in real time in the Mach3 interface, and the measurement is accurate and stable.
– The circuit board is carefully built by engineers, and the design level is clear at a glance.
– With 256 byte NVRAM space, you can save the coordinate values and processing lines of the 6 axes.
– All the output of the motion shaft are differential signals, which can be connected to the servo high speed signal input port.
– It can be set from axis, support double X, double Y, double Z. Soft limit level processing, system more secure
– RS485 isolation bus, which can expand the input and output, or read the servo position, connect the grating ruler and so on.
– Omnidirectional isolation, all input and output are isolated from the core of motion control, and pulse isolation is isolated by high-speed 10M optocoupler. Support single double pulse mode
– Upgrade convenience, this product upgrade hardware layer firmware through USB only brush machine, fast speed, not afraid of brushing, the firmware open, can try 1 hours, more than 1 hours will stop.
Application:
– Processing various patterns of colorful mold
– Used in advertising
– With CNC controller,suitable for a variety of small and medium-sized automatic equipment, instruments
– For mould that processing a variety of patternssuch like embossing plate, sole mould, button mould, the zipper die, patterns and characters of impression and gold stamping mould, mold equipment, mold, and other glass.
– Advertising , such as our cards, signs, architectural models, badges, badge, nameplate, panels, logo, numbers, signs, craft decoration, furniture decoration.
– For the portrait, landscape, calligraphy lettering, seals and other graphic art sculpture, calligraphy, Basso relievo, etc..
– With CNC controller, suitable for all kinds of small and medium automation equipment, instruments.
– USB interface; use MACH3 software; 5 axis linkage; maximum output 100KHZ per axle; with inverter interface; with hand wheel interface; strong anti-interference ability.
– Supports various versions of MACH3 software, support the latest version.
– Supports Windows XP, WIN7, WIN8, WIN10, support 64 bit system, support laptop, support Tablet PC.
– Peripheral wide voltage input, 12-24V, and anti reverse function.
– All input signals can be connected by optical coupling isolation, emergency stop, knife, limit, back to zero, to protect computer security.
– One way through the opt coupler isolation 0-10V analog voltage output, can control the 0-10V analog voltage input frequency converter, control spindle speed.
– Provide PWM output (5V level), and can be connected to spindle speed governor controlled by PWM.
– Provide 4 output ports (5V level), which can be connected to the relay module with optical coupler, and control water cooling, spray and so on.
– Can be connected with common anode or common cathode, input level is 5V, with opt coupler input stepper motor driver.
– At the same time, provide 5 axis interface wiring outlet (XH2.54), convenient connection.
– Provide an electronic hand wheel interface.
– for processing various patterns such as embossing plate, sole mould, zipper mould, pattern die and stamping die, instrument mold, glass mold etc..
– for the advertising industry such as: our brand, signs, architectural models, badges, nameplate, panels, logo, numbers, signs, craft decoration, furniture decoration etc.
– for the portrait, landscape, calligraphy lettering, seals and other graphic art sculpture, calligraphy, Basso relievo, etc..
– With the CNC controller, suitable for all kinds of small and medium-sized automation equipment and instruments.
cnc controller 