Applications:MK4-V:4 axis motion card works with Mach3 CNC system under all windows platform

Electrical Characteristics:
– CPU:Dual-Processors, ARM+FPGA
– Axis output control:
Drive Current:Isolated open collector output; 5V, 20mA
Drive:Pulse + direction output
Output frequency:2000 KHZ (2MHz)
Axis:MK4-M4:4-axis/MK6-M6:6-axis
Isolation Voltage:3.5KV
– Spindle inverter output
Analog voltage output:0-10V
PWM output:5V, 1KHZ, Duty;  0-100%
Pulse + direction output:5V, 15HZ to 4 KHZ
– Spindle speed input
Input:Isolated input, 5V pulse signal
Isolation Voltage:3.5KV
– 8 IO output
Drive Current:Isolation: 50mA, 25V
Isolation Voltage:3.5KV
– 16 IO input
Input Current:Isolated inputs, 5 mA, maximum voltage 25V
Isolation Voltage:3.5KV
Mach3 Port Position:P1 Port
USB interface:Complies with USB2.0 standard
– Package box size:275X144X42mm
– Weigtht:0.7KG

Features:
– Fully support all Mach3 version
– Support save data when power off.
– Support spindle speed feedback
– Support 3 meter USB cable
– Supports Up 6-axis
– Maximum step-pulse frequency is 2000KHz.Status indicator LED can be useful to show the USB
– Connection,and working status by flashing.
– 16 general-purpose input,8 output has speed function,the spindle actural speed Mach3
– Interface in real-time display
– All IO-port isolation,interference,stable performance
– Ful support for USB hot-swappable,the card is Monitoring USB connection status at any time,

Key feature:
1.Standard usb device and work at all windows with usb hot plug.
2.The card state is monitored.
3.Support 6 axis to motion at the same time.
4.Step Pulse frequncy Up to 2000khz，support servo and step motor driver.
5.The usb state indication with led
6.All io is isolated,anti-noise and stable performance
7.Spindle control with PWM and step/pulse
8.Aluminum shell,shield the interference.
9.Speed index function.
10.Power off and continue function

Software installation:
– First,install Mach3 software to your PC.
– Second,copy your driver into Mach3.Check readme file in the CD.
– Check our wiring for reference,connect our card to your machine correctly.
– Connect your PC to our card by using network cable.
– After these steps,you can open your Mach3 software for operating.

300KHz 3 4 5 6 Axis MACH3 USB motion control card CNC Standard Board M3 M4 M5 M6

Specification: 

– Model: NVUM USB MACH3 Card

– Can control 4pcs stepper motor

– with 12 channel programmable input port,can set it for emergency function

– with 10 channel programmable output port,can set for water colling devices

– with 1 channel standard handwheel pendant MPG port

– Spindle PWM output control

– Support MACH3 software

– USB interface,support Mach3 Software

– DCDC electrical isolation

– Optocoupler isolation

– Max 200khz stepper motor pulse output,suitable for most CNC milling machine system

– Support extend encoder to adjust FRO,SRO,SJR parameters

Applications:

– for processing various patterns such as embossing plate, sole mould, zipper mould, pattern die and stamping die, instrument mold, glass mold etc..

– for the advertising industry such as: our brand, signs, architectural models, badges, nameplate, panels, logo, numbers, signs, craft decoration, furniture decoration etc.

– for the portrait, landscape, calligraphy lettering, seals and other graphic art sculpture, calligraphy, Basso relievo, etc..

– With the CNC controller, suitable for all kinds of small and medium-sized automation equipment and instruments.

This USB motion control card has the below advantages: small volume, easy to use, has a strong anti-interference ability, No need to install any USB drivers,it can be used after plugging in the computer. ,suitable for all versions of Windows. Fully supporting all Mach3 versions.

Specifications:
– Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
– Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
– Support automatic probe tool
– Support Emergency input
– Support for limit switch
– Support for connecting electronic handwheel
– Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
– Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
– 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
– 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;
– 1 status LED, indicate connection status on the board.

200KHz Mach3 Controller Card Breakout Board for CNC Engraving Machine 4 axis Ethernet port

Fully supporting all Mach3 versions, support Windows 7, 8, 10 (32-bits);

Only support Ethernet interface, need to set IP address (Please read page 20 on the instruction);

Support save data when power off, support resume from breakpoint;

Support spindle speed feedback;

Supports spindle PWM speed control output;

Support 10 meters Ethernet interface cable;

No need to install the driver, plug and play;

Supports 3/4/6-axis linkage;

Maximum step-pulse frequency is 2000KHz, 16 general-purpose input,8 output;

Support differential signal output;

Velocity feedback function, Spindle speed display in real time all IO-port isolation, interference, stable performance;

Support controlling servo motor and step motor;

New USB to Parallel Adapter USB CNC Router Controller For MACH3 LY-USB100 UC100

Details:

Easy plug and play USB to Parallel port adapter. Works perfectly with MACH3,

and doesn’t require any complicated wiring. Just plug it into the USB port on your computer,

and then into your parallel port on your CNC controller! Metal casing, stable and reliable.

Specifications:

– Replace the LPT port of the MACH3.

– 4 axis simultaneous control.

– Work with Mach3 software through plug-ins.

– Up to 1125kHz operation.

– USB connected to the control computer.

– The standard MACH3 standard parallel port

– High speed USB communication and data buffer, stable and reliable operation

4 Axis / 6axis MACH3 Ethernet motion control card MK4 CNC USB Wireless hand wheel

Specification- Ethernet motion card:

Features:

Fully supporting all Mach3 versions, support Windows 7, 8, 10 (32-bits);

Only support Ethernet interface, need to set IP address (Please read page 20 on the instruction);

Support save data when power off, support resume from breakpoint;

Support spindle speed feedback;

Supports spindle PWM speed control output;

Support 10 meters Ethernet interface cable;

No need to install the driver, plug and play;

Supports 4axis / 6axis linkage;

Maximum step-pulse frequency is 2000KHz, 16 general-purpose input,8 output;

Support differential signal output;

Velocity feedback function, Spindle speed display in real time all IO-port isolation, interference, stable performance;

Support controlling servo motor and step motor;

Specification- Wireless hand wheel:

Radio frequency: 433 MHz, ISM, theTx power is 10DB and the RX sensitivity is 98DB

USB receiver 4axis (X, Y, Z, A, axis) / 6axis (X, Y, Z, A, B,C axis) with LCD display real-time display

Support 128*64 dot matrix input

Support 100PPR electronic hand wheel function.

Support the 13 shortcut keys, the user is free to define the function

Wireless transmission distance of 40 meters

64 channel frequency hopping transmission, strong anti-interference, stable and reliable; the channel gap is 1 MHz

Low power design, 2 AA battery for 1 months

Industrial grade design, dust proof design, stable and reliable

Applied to a variety of CNC systems, suitable for the use of the industry are: engraving machine industry, engraving and milling machine industry, CNC lathe industry, laser cutting machine industry, flame cutting machine industry, plasma cutting machine industry, automation production control industry.

300KHz 3 4 5 6 Axis MACH3 USB motion control card CNC Standard Board M3 M4 M5 M6

Specification: 

– Model: NVUM USB MACH3 Card

– Can control 4pcs stepper motor

– with 12 channel programmable input port,can set it for emergency function

– with 10 channel programmable output port,can set for water colling devices

– with 1 channel standard handwheel pendant MPG port

– Spindle PWM output control

– Support MACH3 software

– USB interface,support Mach3 Software

– DCDC electrical isolation

– Optocoupler isolation

– Max 200khz stepper motor pulse output,suitable for most CNC milling machine system

– Support extend encoder to adjust FRO,SRO,SJR parameters

Applications:

– for processing various patterns such as embossing plate, sole mould, zipper mould, pattern die and stamping die, instrument mold, glass mold etc..

– for the advertising industry such as: our brand, signs, architectural models, badges, nameplate, panels, logo, numbers, signs, craft decoration, furniture decoration etc.

– for the portrait, landscape, calligraphy lettering, seals and other graphic art sculpture, calligraphy, Basso relievo, etc..

– With the CNC controller, suitable for all kinds of small and medium-sized automation equipment and instruments.

Description About DDCSV2.1-3 Axis Offiline Controller

• The DDCSV2 is the 3 axis and 3 axes motion controller which has been researched and developed by Faster CNC for four years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.
• The DDCSV2 numerical control system adopts the ARM+FPGA design framework.The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design,reliable control and easy.

 Performance parameter of Product

1. Ordinary digital input interface of 16-circuitoptocoupler coupling isolation
2. Ordinary digital input interface of 3-circuit optocoupler coupling isolation
3. Output interface of 0-10V spindle control port with analog quantity(can be modified as PWM output);
4. Support the 3 axis stepper motor control, the highest control pulse output of single axis is 500KHz;
5. ARM9 main control chip;
6. FPGA core algorithm chip;
7. 4.3 inches TFT screen, resolution ratio：480*272；
8. 17 operational keys；
9. The main control equipment is 18V-32V power input, the current capacity is required not to be lower than 0.5A;
10. Support the USB flash disk to read the G code,and the size of G codefile has no  requirement;
11. Be equipped with MPG port and support digital display MPG as well as support the general MPG in the market.
12. Support the panel key with single-axis manual operation, manual step and CONToperation;
13. Support the operation of quickly specify the running position;
14. Support the multi coordinate systems (with automatically saving function in case  of power cut);
15. Support the function of saving data automatically after power down.