DDMMV2.1 is a CNC system based mach3 which name is short for “Digital Dream Multiple input Mach3 card Version 2.1”. This card is designed by our Studio You do not need to add other Hardware,and you can complete the signal conversion from the G-code to the movement of the stepper motor drive control. You should use both parallel port and USB port at the same time. This card is compatible with most stepper drives and servo drives. And it is perfect weapon to replace mach3 parallel interface board.

The control box adopts DC brushless spindle drive, 4A 4 axis integrated parallel port interface, with NC200 can support parallel port Mach3, at the same time support USB and computer connection.

1.USB does not need to install the driver, so the Windows version is plug and play;

2. Full support for USB hot plugging, monitoring USB connection status at any time;

3. Support up to 6 axes linkage, including jog 6 axis linkage; (depending on the model, the number of                   supported axles is different)

4. With 2000KHz pulse output, support servo / stepper motor;

5. Have status indicator, can prompt USB connection status, Mach3 connection status;

6. Therefore, the IO port is completely isolated, with strong anti-interference and stable performance;

7. Support spindle PWM speed regulation output; support spindle pulse + direction output;

8. Aluminum casing, shielding interference, stable and reliable;

9. Support spindle speed feedback function;

10. Support power-off and resume function;

Features:

• Fully supporting all Mach3 versions, support Windows 7, 8, 10 (32-bits);
• Only support Ethernet interface, need to set IP address (Please read page 20 on the instruction);
• Support save data when power off, support resume from breakpoint;
• Support spindle speed feedback;
• Supports spindle PWM speed control output;
• Support 10 meters Ethernet interface cable;
• No need to install the driver, plug and play;
• Supports 3-axis linkage;
• Maximum step-pulse frequency is 2000KHz, 16 general-purpose input,8 output;
• Support differential signal output;
• Velocity feedback function, Spindle speed display in real time all IO-port isolation, interference, stable performance;
• Support controlling servo motor and step motor;

USB CNC Mach3 engraving machine milling E-CUT motion control card 4 axis

Specification:

1. Supports all Mach3 versions, including the Mach3 R3.042.040 version.

2. Supporting Windows series, no need to install any USB drivers and plug.

3. Full support for USB hot-swappable, the card is Monitoring USB connection status at any time. Under the operation of Mach3,it can be reconnect automatically after disconnect.

4. Supports 4 axis linkage,including point to point move.

5. Supporting auto tool zero,electronic handwheel and software limit,return difference eliminating.

6. 120M working frequency, Maximum step-pulse frequency is 1MHz, Perfectly drive servo and stepper motor in three ways: pulse / direction, CW / CCW, AB quadrature output.

7. Status indicator LED can be useful to show the USB connection, and working status by flashing.

8. 16 general-purpose inputs, PNP or NPN input status can be configured in Mach3.

9.  8 electronic switch outputs. Darlington open-drain output.

10. Measures real-time spindle speed (Support the Hall element and quadrature encoder speed masurement , etc.) and spindle speed can be observed in March3 to perfectly support the application of spindle. Perfectly support the lathe spindle applications and other occasions, whitch requires precise spindle speed.

11. Use external 12V-24V DC power supply to isolate USB and external port,and to make the system more stable.

12. 11 high-speed optical couplers with 10MHz, and 24 general optical couplers(Total optocoupler reach to 35 )for isolating all of the input/output signals, isolation voltage up to 2KV

13.  2 spindle export interface: accurate 0-10V analog output, supporting converter to control spindle drive; PWM output with 5V drop-down , providing PWM speed drive,CW/CCW output,puls/dir output and quadrature output for servo or stepping driver.

14. The output spindle can be configured into any axis of the 4 shaft through the software.

15.  2 external adjustment-knob to adjust the processing speed ,spindle speed and manual mode processing speed.

16. The 4 layers circuit board selected high-quality devices is exquisite.

This USB motion control card has the below advantages: small volume, easy to use, has a strong anti-interference ability, No need to install any USB drivers,it can be used after plugging in the computer. ,suitable for all versions of Windows. Fully supporting all Mach3 versions.